The GR Corolla headlights come with an orange sidemarker built in that sticks out like a sore thumb. These overlays allow you to mask that orange, getting rid of the eye sore, and giving the side profile of the car a much more clean and sleek appearance while still allowing the reflector to work correctly.
These overlays are designed and cut in-house using high-quality vinyl to ensure proper fit and finish.
Installation Instructions for DARK SMOKE & LIGHT SMOKE (Dry Application)
-
Note: The front of the overlays is indicated by the location of the “L” and “R” so make sure to pay attention to the orientation.
-
Prior to applying the overlay, make sure the surface is thoroughly cleaned and dry.
-
Carefully peel the overlay off of the backing and use the bottom edge of the headlight to line it up to cover the orange sidemarker. There is a line in the lens of the headlight that is approximately 1/4” away from the edge that you can use as a guide.
-
Once you have successfully positioned the overlay where you want it, use a vinyl squeegee or microfiber to remove any air bubbles. Use of a heat gun can help to ensure you don’t get any wrinkles when installing the overlay
-
We recommend allowing at least 48hrs before washing the car to allow for the adhesive to cure and avoid directly spraying them with a pressure washer.
-
The temperature needs to be a minimum of 65°F for proper application.
